|
|
|
|
|
|
|
BeanDevice® 2.4GHz AX-3D XRange
Wireless IIOT vibration sensor | built-in datalogger | High performance version
|
|
|
|
|
|
|
|
|
|
Product Reference
|
|
|
|
MR – Measurement Range (1g = 9806.65 mm/s^2)
- 2: ±2g measurement range
- 10: ±10g measurement range
|
PS - Power Supply
RB : Built-in rechargeable Lithium-Polymer battery 2Ah
XT : External Power supply
|
MO - Mounting Option
SCM - Screw Mounting Lid
MM - Magnetic Mounting Lid
|
Example n°1: BND-AX3D-10G-XR-RB-SCM, High performance wireless accelerometer with 10g measurement range, built-in rechargeable battery, screw mounting
Example n°2: BND-AX3D-2G-XR-XT-MM, High performance wireless accelerometer with 2g measurement range, external power supply , Magnet Mounting
|
Accelerometer Specifications
|
|
Accelerometer technology
|
Accurate and low power MEMS technology
|
|
Sensitivity
|
±2g Version : 61 µg/digit
±10g version: 305 µg/digit
|
|
Typical non-linearity
|
±0,1% FS
|
|
Analog to Digital converter
|
16-bits, SAR architecture (Successive Approximation Register) with temperature compensation
|
|
Sensor frequency response (-3 dB)
|
DC to 800 Hz
|
|
Noise spectral density
|
±2g Version : 45 µg/√Hz
±10g version: 100 µg/√Hz
|
|
Zero-g Offset Variation from RT over Temp
|
±2g Version : ±0.2 mg/°C
±10g version: ±0.1 mg/°C
|
|
Sensitivity Variation from RT over Temp
|
±2g Version : ±0.01 %/°C (XY) , ±0.02 %/°C (Z)
±10g version: ±0.01 %/°C
|
|
Offset Ratiometric Error
|
±2g Version : 4mg
±10g version: ±0.2% (XY) , ±0.1% (Z)
|
|
Sensitivity Ratiometric Error
|
±2g Version : ±1.25 % (X-Y) , ±0.2 % (Z)
±10g Version : ±1.6% (X-Y) , ±0.2 % (Z)
|
|
Cross Axis Sensitivity
|
2%
|
|
Anti-aliasing filter
|
Butterworth 5th order filter – cut-off frequency : 1 Hz to 2000 Hz remotely programmable (BeanScape®)
|
Over-the-air configuration (OTAC) parameters
|
|
Data Acquisition mode
(SPS = sample per second)
|
Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour
Alarm & Survey mode: 1s to 24 hour
Streaming Mode
|
|
Sampling Rate (in streaming packet mode)
|
Minimum: 1 SPS
Maximum: 3 kSPS per axis (one axis enabled)
1,5 kSPS per axis (2-axis enabled)
1 kSPS per axis (3-axis enabled)
|
|
Alarm Threshold
|
High and Low alarms threshold
|
|
Programmable Cut-off frequency (Anti-aliasing filter)
|
1– 2000 Hz
|
|
Power Mode
|
Sleep with Network Listening & Active
|
|
Sampling Rate
(in streaming packet mode with data logger only)
|
Minimum: 1 SPS
Maximum: 4 kSPS maximum per axis (one or two axis enabled)
3,5 kSPS per axis (3-axis enabled)
|
|
|
|
|
Ultra-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E)
|
|
WSN Topology
|
|
|
Data rate
|
|
|
RF Characteristics
|
ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by BeanAir®
|
|
TX Power
|
+18 dBm
|
|
Receiver Sensitivity
|
-104 dBm
|
|
Maximum Radio Range
|
650m (Line of Sight) , 30-100m (Non Line of Sight)
|
|
Antenna
|
Omnidirectional radome antenna with antenna diversity
Gain : 3 dBi
Waterproof IP67
|
|
|
|
Storage Capacity
|
up to 8 million data points
|
|
Wireless data downloading
|
20 minutes to download the full memory (average time)
|
TimeSync function : Clock synchronization over the Wireless Sensor Networks (WSN)
|
|
Clock synchronization accuracy
|
±2.5 ms (at 25°C)
|
|
Crystal specifications
|
Tolerance ±10ppm, stability ±10ppm
|
Environmental and Mechanical
|
|
Casing
|
• Dimensions in mm (LxWxH): 100 x 60 x 31 (without antennas and mounting eyelet)
• Weight (with internal battery) : 217g (screw mounting) and 245g (magnet mounting)
|
|
Shocks resistance
|
150g during 50 ms
|
|
Operating Temperature
|
-20 °C to +65 °C
|
|
Norms & Radio certifications
|
• CE Labelling Directive R&TTE (Radio) ETSI EN 300 328
• FCC (North America)
• ARIB STD-T66 Ver 3.6
• ROHS - Directive 2002/95/EC
|
|
Base plate
|
• Aluminum black anodized AL 7075 with rugged three-point-mounting
• Screw Mounting Option: the device should be mounted on a flat and smooth surface with 3 screws, dimension M5. Mounting torque 5 ±1Nm
• Magnet Mounting Option: the device should be mounted on a steel surface.
|
|
IP|NEMA Rating
|
|
|
|
Integrated battery charger
|
Integrated Lithium-ion battery charger with high precision battery monitoring :
• Overvoltage Protection, Overcurrent/Short-Circuit Protection,Undervoltage Protection
• Battery Temperature monitoring
|
|
Current consumption @ 3.3V
|
• During data acquisition : 20 to 30 mA
• During Radio transmission : 40 mA @ 0dBm, 80 mA @ 18 dBm
• During Idle : < 30 uA
|
|
External power supply
|
External power supply : +8v to +28v
|
|
Rechargeable Lithium-Polymer battery
|
|
|
|
|
External Power Supply
|
Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67/Nema 6)
Ref: M8-PWR-12V
|
|
ISolar Panel Kit (compatible with External Power Supply version only)
|
Solar panel- Polycrystalline solar cell technology
with Solar charging controller and Lead-acid battery
Ref: X-SOL-5W-M8-2M
|
|
M8 extension cable for external power supply
|
Molded cable with M8-3pins male plug
Material: PVC with shield protection
IP Rating : IP67 | Nema 6
Cable length: 2 meters , Ref: CBL-M8-2M
Cable length : 5 meters, Ref: CBL-M8-5M
Cable length: 10 meters, Ref: CBL-M8-10M
|
|
Calibration certificate
|
Calibration certificate provided by Beanair GmbH
A static calibration method is used on a granite surface plate DIN876
|
|
|
|
|
|
|
Product and Technology News
Pressure and Temperature Transmitter
Download Catalogue
|
