|
|
|
|
|
|
BeanDevice® 2.4GHz HI-Inc Xrange
Wireless inclinometer sensor | tilt/inclination/slope monitoring | built-in datalogger| High-Performance version
|
|
|
|
|
|
|
|
|
|
Product Reference
|
|
|
|
MR – Measurement Range:
- 15B : bi-axis ±15°
- 30B : bi-axis ±30°
|
PS - Power supply :
- RB : Internal rechargeable battery
- XT : External Primary cell
|
MO - Mounting Option
SCM - Screw Mounting Lid
MM - Magnetic Mounting Lid
Leave it empty if there is no mounting option"
|
Example 1: BND-HI-INC-15B-XR-RB-SCM, High performance wireless bi-axis inclinometer with ±15° measurement range, internal rechargeable battery, Screw mounting
Example 2: BND-HI-INC-30M-XR-XT-MM, High performance wireless mono-axis inclinometer with ±30° measurement range, external power supply, Magnet Mounting
|
|
|
|
Inclinometer technology
|
Accurate and low power MEMS technology
|
|
Measurement resolution (Bandwidth 10 Hz)
|
0,001°
|
|
Noise density
|
|
|
Accuracy (Full scale)
|
±0.05° (±0.02° on customer request)
|
|
Long term stability (@23°C)
|
|
|
Offset temperature dependency (temperature range
–25°C to +85°C)
|
±0.002 °/°C
|
|
Sensitivity temperature
|
±0.005 %/°C with temperature compensation
|
|
Sensitivity temperature
|
16-bits, SAR architecture (Successive Approximation Register) with temperature compensation
|
|
Sensor frequency Response (-3 dB)
|
|
|
Noise spectral density
DC to 100 Hz
|
|
|
Anti-aliasing filter
|
Butterworth 5th order filter – cut-off frequency : 1 Hz to 100 Hz remotely programmable (BeanScape®)
|
Over-the-air configuration (OTAC) parameters
|
|
Data Acquisition mode
(SPS = sample per second)
|
Low Duty Cycle Data Acquisition (LDCDA) Mode: 1s to 24 hour
Alarm & Survey mode: 1s to 24 hour
Streaming Packet Mode
Streaming Mode
|
|
Sampling Rate (in streaming packet mode)
|
Minimum: 1 SPS
Maximum: 60 SPS on each axis
|
|
Alarm Threshold
|
2 high levels alarms & 2 low levels alarms
|
|
Programmable cut-off frequency (Anti-aliasing filter)
|
1– 100 Hz
|
|
Power Mode
|
Sleep with Network Listening & Active
|
|
|
|
|
Ultra-Power and license-free 2.4Ghz radio technology (IEEE 802.15.4E)
|
|
WSN Topology
|
|
|
Data rate
|
250 Kbits/s
|
|
RF Characteristics
|
ISM 2.4GHz – 16 Channels. Antenna diversity architecture designed by BeanAir®
|
|
TX Power
|
+18 dBm
|
|
Receiver Sensitivity
|
|
|
Maximum Radio Range
|
650m (Line of Sight) , 30-100m (Non Line of Sight)
|
|
Antenna
|
Omnidirectional radome antenna with antenna diversity
Gain : 3 dBi
Waterproof IP67
|
|
|
|
Storage Capacity
|
up to 8 million data points
|
|
Wireless data downloading
|
20 minutes to download the full memory (average time)
|
TimeSync function : Clock synchronization over the Wireless Sensor Networks (WSN)
|
|
Clock synchronization accuracy
|
±2.5 ms (at 25°C)
|
|
Crystal specifications
|
Tolerance ±10ppm, stability ±10ppm
|
Environmental and Mechanical
|
|
Casing
|
• Dimensions in mm (LxWxH): 100 x 60 x 31 (without antennas and mounting eyelet)
• Weight (with internal battery) : 217g (screw mounting) and 245g (magnet mounting)
|
|
Shocks resistance
|
150g during 50 ms
|
|
Operating Temperature
|
-20 °C to +65 °C
|
|
Norms & Radio certifications
|
• CE Labelling Directive R&TTE (Radio) ETSI EN 300 328
• FCC (North America)
• ARIB STD-T66 Ver 3.6
• ROHS - Directive 2002/95/EC
|
|
Base plate
|
• Aluminum black anodized AL 7075 with rugged three-point-mounting
• Screw Mounting Option: the device should be mounted on a flat and smooth surface with 3 screws, dimension M5. Mounting torque 5 ±1Nm
• Magnet Mounting Option: the device should be mounted on a steel surface.
|
|
IP|NEMA Rating
|
IP67 | Nema 6
|
|
|
Integrated battery charger
|
Integrated Lithium-ion battery charger with high precision battery monitoring :
• Overvoltage Protection, Overcurrent/Short-Circuit Protection,Undervoltage Protection
• Battery Temperature monitoring
|
|
Current consumption @ 3.3V
|
• During data acquisition : 30 to 40 mA
• During Radio transmission : 80 mA @ 18 dBm
• During sleeping : < 30 µA
|
|
External power supply
|
|
|
Rechargeable battery
|
High density Lithium-Ion rechargeable battery with a capacity of 950 mAh
|
|
|
|
External Power Supply
|
Wall plug-in, Switchmode power Supply 12V @ 1,25A with sealed M8 Plug (IP67/Nema 6)
Ref: M8-PWR-12V
|
|
Solar Panel Kit (compatible with External Power Supply version only)
|
Solar panel- Polycrystalline solar cell technology
with Solar charging controller and Lead-acid battery
Ref: X-SOL-5W-M8-2M
|
|
External Primary Cell in a Waterproof IP67 Casing
|
Exernal Primary cell mounted in a IP67 aluminum Alloy casing:
IP67 Battery Holder
Lithium-thionyl chloride primary cell (Li-SOCl2) 6,5 Ah
Ref: PRIM-XTENDER
|
|
M8 extension cable for external power supply
|
Molded cable with M8-3pins male plug
Material: PVC with shield protection
IP Rating : IP67 | Nema 6
Cable length: 2 meters , Ref: CBL-M8-2M
Cable length : 5 meters, Ref: CBL-M8-5M
Cable length: 10 meters, Ref: CBL-M8-10M
|
|
Calibration certificate
|
Calibration certificate provided by Beanair GmbH
A static calibration method is used on a granite surface plate DIN876
|
|
|
|
|
|
|
Product and Technology News
Pressure and Temperature Transmitter
Download Catalogue
|
