Orbit® 3

 
 
The Orbit3 Excel® Add-in enables you to take readings from Orbit Modules forming an Orbit Network and place them in cells of a Microsoft® Excel® spreadsheet.
 
A big benefit of Excel Add-in as it enable a popularly using commercial software, allows user to modify and setting up the measurement system for their own usage without incurring software programming cost.
 
Measurement Interfacing Module
USB 2.0 Ethernet Bluetooth RS232C
12Mbps 10/100Mbps 3 Mbps 115.2Kbps
 

Excel Add-in works with Solartron Orbit®3 Digital Gauging, Displacement and Positioning Network

Solartron Orbit® Network: a digital measurement system that makes it simple and easy to inter-connect high accuracy Solartron instruments, and other sensors to your computer, network or PLC.

Calibrated System

Each Solartron probe or instrument is available with a digital module at the end of the cable. Inside the module is a chip that digitizes the analogue signal from the probe. The probe is calibrated and linearized at the Solartron factory, with a guaranteed accuracy of 0.05% of range or 0.2 microns, whichever is greater, 0.15 micron repeatability, and 0.01 micron resolution. You can then master the probe anywhere over its measurement range, and attain the same accuracy from that master point. Solartron also offers a variety of calibrated non-contact Laser sensors available.

 

Connect to other Sensors

The Orbit® 3 Network will connect to 3rd party sensors via interface modules. 

  Analogue Interface Module (AIM): Connect to any sensor with a DC or 4-20mA output. 

  Encoder Input Module, (EIM): Connects with any rotary encoder or other device with a TTL output. With these connections, all              readings can be sent to a PLC or PC seamlessly. 

  Digimatic Input Module: Connects to any Mitutoyo gauge 

  Digital Input/output Module: An eight-pin module that acts as an I/O interface to a PLC.

 
 

 

Product and Technology News

Orbit® Gauge Software

Application Selector

Solartron Metrology

Download Catalogue