< 0.01% or ±0.127mm (±0.005”) whichever is greater,
(±0.051mm or ±0.002” Typical)
Resolution
Internal: 1.524μm (0.00006”)
Output: 16-Bit
Repeatability
Equal to resolution
Hysteresis
25.4μm (0.001”)
Dead Band
63.5mm63.5mm (2.50”) standard
Null Zone
50.8mm (2.00”) standard
Mechanical
Body Length
81.28mm (3.2”)
Hex Base
44.45mm (1¾”) diameter
Thread
M18x1.5
LED
Diagnostic Tri-Colour LED
Electrical Interface
Input Voltage
7 to 30 VDC
Current Draw
1 watt typical, 40mA at 24VDC
Connector
5 Pin 12mm Euro micro, integral cable assembly, 6 Pin
or 8 Pin DIN
Update Time
L ≤ 51mm = 0.5ms
51mm to ≤ 305mm = 1ms
306mm to ≤ 763mm = 2ms
763mm to ≤ 1270mm = 3ms
1271mm to ≤ 2540mm = 4ms
2541mm to ≤ 3810mm = 5ms
3811mm to ≤ 4572mm = 6ms
4573mm to ≤ 6350mm = 7ms
6351mm to ≤ 7620mm = 8ms
LED
Diagnostic Tri-Colour LED
Green = Power is applied and magnet is present
Red = Fault, magnet is in the Dead Zone or lost
Yellow = Out of the active programmed range
Zero & Span Adjustability
Factory set at Null & Dead Band locations,
Field re-settable at any location within active stroke
Output
V0 = 0-10 VDC
V1 = 10-0 VDC
V2 = -10 to 10 VDC
V3 = 10 to -10 VDC
V4 = 0 to 5 VDC
V5 = 5 to 0 VDC
V6 = -5 to 5 VDC
V7 = 5 to -5 VDC
C4 = 4 to 20Ma
C4 = 20 to 4mA
Environmental
Storage Temperature
40°C to 105°C (-40° to 221° F)
Operating Temperature
Head
Guide Tube
-40°C to 85°C (-40° to 185° F)
-40°C to 105°C (-40° to 221° F)
Enclosure
IP68, IEC 600529
Vibration
30Gs (lab tested)
IEC 60068-2-6
Shock
1000Gs (lab tested)
IEC 60068-2-27
Guide Tube Pressure
345 bar (5000 psi) continuous
689 bar (10000 psi) spike