Powerdrive F300 - Optimum energy efficiency, flexible functionality and ease of use
    1.1 kW – 2.8 MW (1.5 - 4,200 hp)
    200 V / 400 V / 575 V / 690 V
    Powerdrive F300 is designed to control all AC induction motors and sensorless permanent magnet motors on the market. Even greater performance and energy efficiency savings can be achieved with our Dyneo® package which includes the Powerdrive F300 and the LSRPM permanent magnet motor.
    Features Specifications Options Software Downloads

    Flexible functionality, minimizing your resources

    Provides flexibility in cabinet mounting options and functionality including I/O and fieldbus communications

    The F300 is a flexible solution for panel mounting, integration into systems and wall mounting in clean environments.                   Automation centres can provide built-to-order cabinet solutions, ideally matching customer requirements.

    Comprehensive on-board drive programming available for fan, pump and compressor applications

    On-board PLC provides extensive IEC 61131-3 compliant programming functionality without the additional cost

    Optimum energy efficiency

    Best in class efficiency from matched motor and drive combinations

    Enables conformance with the latest EC efficiency regulations through the control of AC induction motors and Ultra Efficient       IE4 PM/ Super Nema Premium Motors.


    Ease and speed of design, build and commissioning

    Smaller drive dimensions to allow for easier, more economical installation

    Programming software enables rapid, clear code development and the drive interface and PC tools also allow fast, simple drive commissioning, diagnostics and maintenance

    Equipped with wide motor control functionality flexible to ventilation, pumping and compression application needs, which can be rapidly accessed to exacting levels of flow control

    Comprehensive I/O offering boosts component connectivity

    Multiple fieldbus protocols are supported

    Wide power range from 1.1kW through to 2.8MW  to suit your fan, pump and compressor rating

    ​Fan and pump macros with PC Tools provide fast, simple access to flow performance

    Two PID Controllers with anti-windup and user scaling provide flow-specific functionality

    Logic functions including 'and' , 'or', 'invert', 'binary sum' and 'timer' achieved through easy menu setup

    Real-time clock available on the KI-HOA Keypad RTC included in standard offer

    Water hammer control with S-ramp deceleration

    Catch a spinning motor

    On-board Fire Mode allowing run to failure in the event of a fire for the extraction of smoke

    Low load condition monitoring and hysteresis for broken belt and dry pump detection


    Flexible I/O range

    I/O specific to pumping, ventilation and compression application

              2 x analog input, 2 x analog output, 3 x digital input,

              3 x configurable digital output; 2 x form C relay output,

              1 x Safe Torque Off input


    Safe Torque Off

    Safe Torque Off functionality can remove the need for a contactor and can avoid a complete power-down for safe access to       machinery


    Harmonics and drive conformance

    Low harmonic emissions and achieves high conformance levels


    Further Information

    Click here to download the Powerdrive F300 brochure