Aerospect SPS 1000L


An industrial hardened jet engine alignment system which significantly reduces stacking time and optimises engine performance. The Aerospect system consists of a high load capacity air bearing spindle made from hardened tool steel mounted on a graniteplate. This spindle provides a high degree of accuracy while maintaining shop floor robustness required during the engine build and alignment process. Measurements are taken using 4 precision gauge heads (8 optional) mounted on two gauges posts ensuring fast simple set up.

Special "swing away" gauge arms allow the operator to load and unload components in a rapid and safe manner. Developed in conjunction with a major engine manufacturer the system is powered by Aerospect windows based software, unique algorithms are used to optimise alignment and help eliminate "crankshaft" and "banana" type effects casued by incorrect stacking, features include;

 Air bearing spindle master axis with radial and axial                    precision of < 0.125um

 Full centre and level capability with 454Kg load capacity

 Low profile table for stacking and build assistance

 Multi-gauge set up (optional 8) with 4 gauge simultaneous        measurement

 Swing away gauge heads for safe load/unload of                          components

 Aerospect stack prediction software with easy set up and        shopfloor programming

 Centre and level software aid

 Parameters include roundness,flatness, run-out and SP            value and angle

 

Aerospect SP 150DT


The Aerospect SPS 150DT consists of an air bearing spindle mounted on a granite table all sitting on a sturdy support frame, the systems small footprint and ergonomic design make it ideally suited for small turbine components and assemblies.

Measurements are taken using 4 precision gauge heads (8 optional) mounted on two gauges posts providing access to multiple features on the most intricate of components.

Developed in conjunction with a major engine manufacturer the system is powered by Aerospect windows based software, this provides all the measurement parameters required for assembly and manufacture, features include;

 Air bearing spindle master axis with radial and axial                    precision of < 0.125um

 Full centre and level capability with 1136Kg load capacity

 Multi-gauge set up (optional 8) with 4 gauge simultaneous        measurement

 Gantry system with drop arm for deep bore access

 Aerospect stack prediction software with easy set up and        shopfloor programming

 Centre and level software aid

 Parameters include roundness,flatness, run-out and SP            value and angle

 

Aerospect SPS1000T


An industrial hardened jet engine alignment system which significantly reduces stacking time and optimises engine performance. The Aerospect system consists of a high load capacity air bearing spindle made from hardened tool steel mounted on a granite plate. This spindle provides a high degree of accuracy while maintaining shop floor robustness required during the engine build and alignment process.

Measurements are taken using 4 precision gauge heads (8 optional) mounted on two gauges posts ensuring fast simple set up.

Special "swing away" gauge arms allow the operator to load and unload components in a rapid and safe manner. Developed in conjunction with a major engine manufacturer the system is powered by Aerospect windows based software, unique algorithms are used to optimise alignment and help eliminate "crankshaft" and "banana" type effects casued by incorrect stacking, features include;

 Air bearing spindle master axis with radial and axial                    precision of < 0.125um

 Full centre and level capability with 454Kg load capacity

 Raised profile table convenient for piece part                                measurement and low profile stacks

 Multi-gauge set up (optional 8) with 4 gauge simultaneous        measurement

 Swing away gauge heads for safe load/unload of                          components

 Aerospect stack prediction software with easy set up and        shopfloor programming

 Centre and level software aid

 Parameters include roundness,flatness, run-out and SP            value and angle

 

Aerospect SPS 2500C(1000C)


The Aerospect SPS 2500C is a high load capacity stack prediction system designed for the gas turbine industry. This heavyweight system is designed for loads of up to 1137Kg and heights of 2.3 metres allowing measurement and alignment of large gas turbines and assemblies.

The system has a low profile granite base encapsulating a high accuracy frictionless air bearing spindle and adjustable column with arm and gauge, features include;

 Air bearing spindle master axis with radial and axial                    precision of < 0.125um

 Full centre and level capability with 455kg load capacity            (optional 1137Kg)

 Up to 2.3 metre heights with adjustable column and gauge        arm

 Aerospect stack prediction software with easy set up and        shopfloor programming

 Centre and level software aid

 Parameters include roundness,flatness, run-out and SP            value and angle

 

Aerospect SPS 2500LC


The Aerospect 2500LC is a jet engine alignment system consisting of a high load capacity air bearing spindle made from hardened tool steel mounted on a granite plate.

Measurements are taken using 4 precision gauge heads (8 optional) mounted on a gantry system, the gantry system provides measurement access to deep bores using a special drop arm while the two opposing side posts provide access to all other component features ensuring fast simple set up.

Developed in conjunction with a major engine manufacturer the system is powered by Aerospect windows based software, unique algorithms are used to optimise alignment and help eliminate "crankshaft" and "banana" type effects casued by incorrect stacking, features include;

 Air bearing spindle master axis with radial and axial                    precision of < 0.125um

 Full centre and level capability with 1136Kg load capacity

 Multi-gauge set up (optional 8) with 4 gauge simultaneous        measurement

 Gantry system with drop arm for deep bore access

 Aerospect stack prediction software with easy set up and        shopfloor programming

 Centre and level software aid

 Parameters include roundness,flatness, run-out and SP            value and angle

 

 

Product and Technology News

Pressure and Temperature Transmitter

Download Catalogue