TM-Series - Surface Variation Detector

 

 

OUTLINE

  • The TM-series Surface Variation Detectors are designed to monitor surface variations on an object by means of emitting light to the object and detecting differences of interrupted light volume which is affected by the variation.
  • Our TM-series detectors can be used on the production lines of all products such as optical fibers, enamel, electric and vinyl wires, communication and power cables, metal and glass rods, plastic tubes, pipes, hose, etc., where detecting surface variations is important.

 

FEATURES

Non-contact type detection & reliable, continuous high speed detection

Applicable for wide range of line speed from low to high speed

Uninterruptable by color and material of the object

Resistant against object vibration

Simple adjustment of detection level by direct reading

Highly accurate multi-axis variation detection

Detection of various variations with wide range from 10 micron to more then a few millimeters

Easy operation and simple maintenance

 

For Fine wire/cables (Target Dia.: Φ0.02~3mm, 0.02~5mm)

  For Fine wire/cable
 Model TM-503W TM-1100XY TM-1003W TM-1104W
 Detecting direction 3 2 3 4
 Measuring method Double-slit, infrared LED projection type
 Measuring range 0.02 - 3mm 0.02 - 10mm 0.02 - 5mm 0.02 - 10mm
 Detecting sensitivity 0.01 - 1mm
 Detecting accuracy +/-1% of max. set value
 Slit length 6mm 18mm 12mm 18mm
 Slit width 0.1mm 0.5mm
 Line speed[*1] 5m/min-2000m/min 1m/min - 1500m/min
 Recorder output +/-0.2V/0.1mm +/-1V/0.1mm +/-0.5V/0.1mm +/-1V/0.1mm
 Alarm output Red LED turns on,
Relay contact output(AC250V 2A Resistance load)
 Alarm time[*2] 0.1 sec 0.5 sec 0.1 sec 0.5 sec
 Ambient temperature -5 - 50 degree centigrade(No condensation)
 Power supply[*3] DC+/-15V AC100V 50/60Hz DC+/-15V AC100V 50/60Hz
 Power consumption 6VA 10VA 4VA 10VA
 Outside demension (W * H * D[mm]) 150 * 140 * 40 260 * 265 * 60 150 * 140 * 40 350 * 280 * 55
 Weight 0.8kg 2.5kg 1kg 5kg

[ *1] PW-01 is a TM-1003W dedicated power supply unit. PW-02 is a power supply unit of the TM-503W.

 

For Middle dia. wire/cable. (Target Dia.: Φ0.1~35mm)
 Model TM-3001W TM-3002W TM-3004WA TM-3008W
(TM-3004WA)
(TM-3004WB)
TM-3016W
(TM-3004WA)
(TM-3004WB)
(TM-3004WC)
(TM-3004WD)
 Detecting direction 1 2 4 8 16
 Detecting method Double-slit, infrared LED projection type
 Measuring range 0.1 - 35mm
 Detecting sensitivity 0.05 - 10mm
 Detecting accuracy +/-1% of max. set value
 Slit length 48mm
 Slit width 1mm
 Line speed[*1] 1m/min - 1500m/min
 Recorder output +/-0.1V/0.1mm(on each axis)
 Alarm output Red LED turns on,
Relay contact output(AC250V 2A Resistance load)
 Alarm time[*2] 0.5 sec
 Ambient temperature -5 - 50 degree centigrade(No condensation)
 Power supply[*3] AC100V 50/60Hz
 Power consumption 5VA 10VA 10VA 20VA 40VA
 Outside demension (W * H * D) 260 * 90
* 41mm
260 * 260
* 60mm
370 * 335
* 60mm
370 * 335
* 120mm
370 * 335
* 240mm
 Weight 1.5kg 3kg 6kg 12kg 24kg

 

For Large dia. wire/cable/pipe
 Model TM-4001 TM-4002 TM-4004A TM-4008
(TM-4004A)
(TM-4004B)
TM-4016
(TM-4004A)
(TM-4004B)
(TM-4004C)
(TM-4004D)
 Detecting direction 1 2 4 8 16
 Detecting method Single-slit, white tungsten lamp projection type
 Measuring range 0.1 - 60mm
 Detecting sensitivity 0.15 - 10mm
 Detecting accuracy +/-2% of max. set value
 Slit length 70mm
 Slit width 1.5mm
 Line speed[*1] 1m/min - 1000m/min
 Recorder output +/-0.1V/0.1mm(on each axis)
 Alarm output Yellow or Red LED turns on
Relay contact output (AC250V 2A Resistance load)
 Alarm time[*2] 0.5 sec
 Ambient temperature -5 - 50 degree centigrade(No condensation)
 Power supply[*3] AC100V 50/60Hz
 Power consumption 10VA 20VA 30VA 60VA 120VA
 Outside demension (W * H * D) 540 * 160
* 100mm
630 * 560
* 160mm
807 * 674
* 136mm
807 * 674
* 272mm
807 * 680
* 424mm
 Weight 7kg 25kg 38kg 76kg 152kg

 

For Extra large dia. wire/cable/pipe
 Model TM-6004A TM-6008
(TM-6004A)
(TM-6004B)
TM-7003A TM-7009
(TM-7003A)
(TM-7003B)
(TM-7003C)
TM-7012
(TM-7012A)
(TM-7012B)
(TM-7012C)
(TM-7012D)
 Detecting direction 4 8 3 9 12
 Detecting method Single-slit, white tungsten lamp projection type
 Measuring range 1 - 80mm 1 - 130mm
 Detecting sensitivity 0.2 - 10mm
 Detecting accuracy +/-2% of max. set value
 Slit length 90mm 140mm
 Slit width 1.5mm
 Line speed[*1] 0.3m/min - 500m/min
 Recorder output +/-0.1V/0.1mm(on each axis)
 Alarm output Yellow or Red LED turns on
Relay contact output (AC250V 2A Resistance load)
 Alarm time[*2] 0.5 sec
 Ambient temperature -5 - 50 degree centigrade(No condensation)
 Power supply[*3] AC100V 50/60Hz
 Power consumption 30VA 60VA 30VA 90VA 120VA
 Outside demension (W * H * D) 720 * 660
* 153mm
720 * 660
* 306mm
990 * 930
* 125mm
990 * 930
* 375mm
990 * 930
* 500mm
 Weight 38kg 76kg 60kg 180kg 240kg

[*1] Applicable Line speed range varies by variation height.
[*2] HOLD output is available. (Option)
[*3] AC200V Power supply type is available. (Option)
In addition, other models for detecting more directions such as TM-6020(20 axes) are also available.

 

Calibration gauge/ Gauge pin unit/ Fixture guide

Surface Variation Detector with Noise Cancelling Function (TMS-Series)

 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.