Catalog

Tilt Type TC-3/TC-1

Tilt type level switch with only one moving part!

Level detection by simple and secured operation!

Features

Simple structure which is withstandable against big impact loads of particulates.
Applicable to upper, middle, and lower limits.
No power source is needed. Low wiring cost.

Operating Principles

When the main unit suspended from the top of the tank tilts due to the repose angle of the material, the tilt of the main unit is detected and the contacts are switched. The output contact returns to the initial state when there is no more material to be detected.

Specifications

Specification／Model	TC-3	TC-1
Weight	About 1.3Kg (Aluminum casting)	About 11Kg (Cast-iron)
Output Contact	SPDT x 1	SPDT x 1
Contact Capacity	250VAC 10A	250VAC 10A
Temperature	-10～+80℃ （No condensation / no freezing）	-10～+120℃ （No condensation / no freezing）
Conduit Connection	3/8″ (with gland)	1/2″ (with gland)
Conformable Cable	3/8 inch three-core cable	1/4 inch two-core cable
Sensing-paddle fitting	NPT 1/2	NPT 1
Enclosure Rating	IP-56	IP-56