DOWNLOADS

Catalog Download

Particle Type KDS-1 Series

►Features
It monitors the concentration of discharged dust and particles and detects the flow/no flow!
It has no drive section and can keep the high functions through the minimum maintenance. Measurement can be made only by attaching one electrode to the duct or pipe of the dust chamber exit. It is a compact all-in-one type that can be handled and adjusted easily. It is not affected by flow velocity fluctuations. Low concentration can be measured by the high sensitivity

____________________________________________________________________________________________________

►Operating Principles

The particle concentration is detected by the electrode attached to a duct or pipe. Electric charges retained by particles are measured. Contact output is made when the concentration reaches the preset value.

____________________________________________________________________________________________________

►Standard Specification

Power Source		105VAC/210VAC ±10% 50/60Hz
Output Contact		SPDT　250VAC 5A
ON Delay		60sec. max. (Variable)
OFF Delay		60sec. max. (Variable)
Temperature	Amplifier	-20℃～+55℃
	Electrode	-20℃～+80℃（High Temp option）
Enclosure Rating		IP-67