Flow Switches

Flow Detection, Switching & Control 

 

Flow switches detect a change in state from flow or no-flow within pipe or ducting. Correspondingly, the sensor inverts a contact to signal an alarm or control a pump or valve.

 

Flowline general purpose liquid and gas flow switches are offered in sensor and package configurations. Sensors are available in PP-Ryton® or PVDF bodies with a 1A SPST relay and adjustable flow switch set point.

 

The sensors are also available in packages with compact relay controllers for pump control or junction boxes for wiring termination. Select the appropriate flow switch type based upon your application media, supply, control and installation requirements.

 
    

Flow Switches

 

Switch-Pro™ with Compact Relay Controller

Fail-safe relay control of pumps and valves with 0-60 second time delay

Optional strobe brings immediate attention to flow alarm conditions

PP.Ryton or PVDF wetted material for challenging corrosive fluids

 

 

 

 

Switch-Pro™ with Compact Junction Box

1A relay selectable NO or NC via power supply wiring polarity

PP enclosure rated NEMA 4X with 300° conduit swivel base

PP/Ryton or PVDF wetted material for challenging corrosive fluids

Compatible with Flowline controller, alarm and fitting accessories

         

 

 

 

 

Flow Switch™ Compact Relay Controller

Fail-safe compact relay control of pumps and valves with 0-60 second time delay

Optional strobe brings immediate attention to flow alarm conditions

PP enclosure rated NEMA 4X with 300° swivel base for easy conduit alignment

Easy setup with LED indicators for sensor, power and relay status

Compatible with Flowline liquid (FT10) or gas (GT10) flow switch sensors

 

 

 

 

 

 

 

 

 

Flow Switch™ Remote Relay Controller

Fail-safe remote relay control of pumps and valves with 0-60 second time delay

Easy setup with LED indicators for sensor, power and relay status

35 mm DIN rail mount PP enclosure with removable terminal strips

 
 
 
 
 
 

 

Application

Offered in liquid and gas configurations for low-flow detection, the general purpose flow switch is a great choice for a diverse range of relatively clean, non-coating media. Liquid examples include deionized water and sulfuric acid. Gas examples include nitrogen and scrubber exhaust fumes. The 1A relay provides a reliable switch interface with remote devices such as a PLC, SCADA or alarm. The short sensor is intended for use in pipe or ducting from 1/2” to 11/2”; the long sensor is applied in 2” and up. The liquid switch set point may be adjusted from .04 to 3 fps, and the gas switch from 1 to 90 fps.

 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.