DETECTOR

 
Model Name
 
1. TM-1000 
1) TM-1100XY
2) TM-1003W
3) TM-1104W
  2. TM-3000 
1) TM-3001W
2) TM-3002W
3) TM-3008W
4) TM-3016W
  3. TM-4000 
1) TM-4001
2) TM-4002
3) TM-4008
4) TM-4016
  4. TM-6000 
5) TM-6004
6) TM-6008
7) TM-7003
8) TM-7009


LUMP NECK DOWN DETECTOR TM-1003

This device is used to detect the changes in the size of shadows blocked by a measured object. It can be used to detect bumps and dents in all types of manufacturing lines, such as vinyl wires, communication cables, power cables, fiber optic cables, enamel wires, coated wires, and pipes.
It is a non-tactile type that performs high speed, continuous detection, and it is easy to handle.

LUMP NECK DOWN DETECTOR TM-3002W

The measurement range is 0.1~35mm. It is composed of two axes. The detectable size of concave-convex can be set to 0.5~10mm. The fault detection signals are generated as contact points and analog signals. Its top is open wide, so that it can easily pass through the cable.

LUMP NECK DOWN DETECTOR TM-3004WA

The measurement range is 0.1~35mm. It can detect in four axial directions. Compared to two axial types, it has minimal grey areas. It is octagonal in shape, surrounding the surface of cable to perform perfect fault detection.

LUMP NECK DOWN DETECTOR TM-4002

This is the most frequently used model for power cables. The measurement range is 0.1~60mm, and it is composed of two axes. 
You can set it to 0.15~10mm. If it is out of range, then some signals will be outputted.

LUMP NECK DOWN DETECTOR TM-6004

This model is used to detect concave-convex on the surface of thick cables with 1~80mm.
It has four axial detection and supports detection on an octagonal surface.
The thicker the cable is, the larger the grey area is. To minimize the grey area, it adopts eight axes with 16-gonal detection surfaces. For this purpose, you can combine two sets of TM-6004.
 
 
Product Specs
Composition For fine wire/Cable
Model TM-1100XY TM-1003W TM-1104
Detectinf direction 2 3 4
Measuring range a0.02 ~ 5mm
Detecting sensitivity 0.01 ~ 1 mm
Slit Length 18 mm 12 mm 18 mm
Silt width 0.5 mm
Line speed 1m/min ~ 1500m/min
Alarm time 0.5 sec 0.05sec 5sec
Power supply AC 100V 50/60Hz DC ±15V AC 100V 50/60Hz
Outside dimension 260*265*60 150*140*40 350*280*55
Weight 2.5kg 1kg 5kg
Composition For middle dia. wire/cable
Model TM-3001W TM-3002W TM-3004W TM-3008W TM-3016W
Detectinf direction 1 2 4 8 16
Measuring range a0.1 ~ 35mm
Detecting sensitivity 0.5 ~ 10 mm
Slit Length 48 mm
Silt width 1 mm
Line speed 1 m / min ~ 1500 m / min
Alarm time 0.05 sec
Power supply AC 100V 50 / 60Hz
Outside dimension 260*90*41 260*260*60 370*335*60 370*335*120 370*335*240
Weight 1.5kg 3kg 6kg 12kg 24kg
Composition For Large dia. wire /cable/ pipe
Model TM-4001 TM-4002 TM-4004 TM-4008 TM-4016
Detecting direction 1 2 4 8 16
Measuring range a0.1 ~60mm
Detecting sensitivity 0.15 ~10mm
Slit length 70 mm
Slit width 1.5 mm
Line speed 1m/min ~1000m/min
Alarm output Yellow or Red LED turns on, Relay contact output.
Alarm time 0.5 sec
Power supply AC 100 V 50/60Hz
Outside dimension 540*160*100 630*560*160 807*674*136 807*674*272 807*680*424
Weight 7kg 25kg 38kg 76kg 152kg
Composition For Extra. Large dia. wire /cable/pipe
Model TM-6004 TM-6008 TM-7003 TM-7009
Detecting direction 4 8 3 9
Measuring range a1 ~ 80mm a1 ~ 130mm
Detecting sensitivity 0.2 ~ 10mm
Slit length 90mm 140mm
Slit width 2 mm
Line speed 0.3m/min ~ 500m/min
Alarm output Yellow or Red LED turns on, Relay contact output.
Alarm time 0.5sec
Power supply AC 100 V 50/60Hz
Outside dimension 720*660*1153 720*660*306 990*930*1125 990*930*375
Weight 38kg 76kg 40kg 120kg
 
 

 


Please register here in order to access the download page.
Name: *
Email address: *
Company Name: *
Designation: *
Contact No: *
 
  * Please filled in the required details.