Multi-axis Sensor

MBA500

How it Works

  1. 1. In order to characterize the thrust and torque generated by each motor and propeller, a MBA500 is fixed to the motor's end.
  2. 2. When the motor is powered on and rotating, the thrust of the propellers will be measured by the MBA500’s Fz channel, and the back-torque of the motor is measured by the Mz channel, all while maintaining low crosstalk.
  3. 3. This multi-axial sensor, when used with a USB220, allows for a portable setup where a hobbyist/test engineer can use a laptop to analyze the live data of a test both in an outdoor setting or in a more controlled, indoor environment.


View Full Details >>