How it Works

1. 1. During production, motorized test stands check for durability and insertion force of a USB connector.
2. 2. The motorized test stand runs cycle tests on the USB to ensure that the force required to insert or extract the unit from its port meets requirements or doesn't damage the thumb-drive.
3. 3. FUTEK’s Jr. S-Beam load cell (either the LSB200 or LRM200) can be fixed onto the horizontal test stand to repeatedly measure the push and pull forces as the USB connector enters and exits the 2.0 or 3.0 port.
   
4. 4. These force measurements can be recorded and reviewed on FUTEK's IHH500 Intelligent Digital Hand Held Display.